Logitech Presentation slaidivahetuspult │ Logitech Presentation remote clicker

Logitech Presentation slaidivahetuspult │ Logitech Presentation remote clicker

Slaidivahetuspult, mis võimaldab virtuaalse “punatäpi” või esiletõstmise (highlight) abil esiletõsta edastatavat materjali ka videokõnes osalejatele.

Kasutamaks slaidivahetuspulti, on vajalik installeerida arvutisse vastav programm: https://www.logitech.com/en-us/software/logi-options-plus.html ja ühendada USB vastuvõtja arvutiga või luua Bluetooth ühendus. Domeenis olevatele arvutitele on võimalik vastav programm leida Company Portal-ist.

Akut täiesti tühjaks mitte lasta! Aku laetuvust on võimalik jälgida installeeritud programmist. Laadimisaeg on umbes 3 tundi ja aku kestvus on umbes 3 kuud. Puldi tööraadius tootja andmetel on 30 meetrit.

A presentation clicker that allows you to use a virtual "red dot" or highlighter to highlight the transmitted material for participants in a video call.

In order to use the clicker, it is necessary to install the corresponding program on the computer: https://www.logitech.com/en-us/software/logi-options-plus.html and connect the USB receiver to the computer or establish a Bluetooth connection. On domain computers, the program is available for installation in Company Portal.

Do not drain the battery completely! The battery charge can be monitored from the installed program. Charging time is about 3 hours and battery life is about 3 months. According to the manufacturer, the working radius of the clicker is 30 meters.

 

Logitech Presentation seadistamine

Logitech Presentation settings

image-20250331-132905.png

Avades programmi, on võimalik seadistada timer, mis näitaks kellaaega või loendaks aega tagasi.

By opening the program, it is possible to set a timer that would show the current time or countdown.

image-20250331-133003.png

 

image-20250331-133041.png

Pointeri seadistustes on võimalik määrata, kas kuvab “punatäppi”, suurendab teatud ala või toob esile teatud ala. On võimalik valida ka kaks sätet korraga - pulti kasutades kaks korda pointeri nupule vajutades lülitab kahe sätte vahel.

In the pointer settings, it is possible to determine whether to display a "red dot", enlarge a certain area or highlight a certain area. It is also possible to select two settings at the same time - using the remote control, pressing the pointer button twice switches between two settings.

image-20250331-133259.png

 

 

image-20250331-133317.png

 

Hold next ja hold back (pika vajutusega edasi/tagasi) on võimalik seadistada oma eelistuste kohaselt:

Hold next and hold back (long press forward/backward) can be set according to your preferences:

image-20250331-133347.png

 

 

image-20250331-133403.png

 

 

Seadistused on kasutajapõhised ning ei mõjuta teisi arvutikasutajaid.

The settings are user-specific and do not affect other computer users.